|
|
Regular
Posts: 60
| Has anyone used or does anyone use these and what are your opinions?
I bought one and VERY expensive.... Got off my horse and when I went to get back on it rolled completely to the side.
Curious if anyone else had this problem? |
|
| |
|
The Advice Guru
Posts: 6419
  
| I use csi pads on all my horses including my mutton wither horse, and never had the problem, and I ride with a lose cinch.
I would look at saddle fit |
|
| |
|
Elite Veteran
Posts: 747
| You either have the wrong thickness of insert, or your saddle doesn't fit properly. |
|
| |
|
Regular
Posts: 60
| What thickness are you guys using. I bought the 1". Was trying a different saddle that I know for sure dose not fit. |
|
| |
|
Regular
Posts: 60
| I have to say, I just joined the BHW board and have found so much help and knowledge coming from all these posts.
Edited by TLynn 2015-03-16 3:28 PM
|
|
| |
|
The Advice Guru
Posts: 6419
| I have all the thicknesses, but generally use the 1/2 or 3/4 thick inserts.
|
|
| |
|
 Owner of a ratting catting machine
Posts: 2258
| I fired everything else but my CSI pads. I have three. I've never had one move. Are you sure you adjusted it properly?
It needs to be forward towards the shoulder more than other pads to allow the flex plate to function, then tented into the gullet as high as you can get it. |
|
| |
|
Regular
Posts: 60
| I am going to try it with another saddle. Maybe I did not have it forward enough on top of a saddle that I did not think was fitting correctly. |
|
| |
|
Owner of a ratting catting machine
Posts: 2258
| Get on the CSI website, it will have instructions and pictures. Not complicated to place one correctly when you know what to look for. |
|
| |
|
Expert
Posts: 1543
Location: MI | My cousin got one at an expo, the owner was very accommodating and a lot of help -great to work with. If it's not working, I'd contact the company for ideas. They had an awesome return policy too.
|
|
| |
|
 Extreme Veteran
Posts: 422
Location: Fort Bragg North Carolina | The only problem I have is that the shortest pad is too long for all mine and create rubbing marks. Also the sweat marks have changed since using the pad it's hard to evaluate the fit on my saddle I like to look at sweat marks after I ride and the csi leaves more dry spots where the plates are but that could just be me |
|
| |
|
 Experienced Mouse Trapper
Posts: 3106
Location: North Dakota | I know my saddles do not fit my horses quite as good as they should, however, the CSI makes my horses comfortable! I like the 3/4 since I rope and run barrels, it gives my heel horse a little more relief IMO. This is the first pad I've truely fallen in love with. |
|
| |
|
 Elite Veteran
Posts: 1035
Location: TN | I just got one in the 1/2" thickness. I've only ridden it twice but so far I really like it! The videos on the website are really helpful, they actually helped convince me to try one. I haven't made a run in it yet but with riding my horse seems comfortable and sweat patterns seem even with it. I tented it up into the gullet and didn't have any rolling issues on my horse with low withers. Fingers crossed that it keeps on doing well and keeping my boy comfy. |
|
| |
CSI Pads