Error encountered in: C:\HostingSpaces\weblevel\forums.barrelhorseworld.com\wwwroot\forum\templates\original\fragments\template-begin.asp
Microsoft VBScript compilation error - Expected statement
Shiloh Jordan Peterson contender, would it fit a high withers?
camocowgirl
Reg. Apr 2010
Posted 2018-03-07 4:11 PM
Subject: Shiloh Jordan Peterson contender, would it fit a high withers?


Unable to Live Without Chocolate or Coffee


Posts: 1841
100050010010010025
I need a saddle to fit my little paint 14.2 950lb. High withers. Not wide short back. A standard martin racer was too wide and too flat of bars. I found a nice Shiloh jp contender. Might that work? It’s 6 3/4 gullet.

Someone said I need to try a double Lynn McKenzie special but I cannot find a used one in my price budget. I’ve never rode in a contender.

Edited by camocowgirl 2018-03-07 4:13 PM
↑ Top ↓ Bottom
Three 4 Luck
Reg. Sep 2003
Posted 2018-03-07 4:42 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?



Accident Prone


Posts: 22277
50005000500050002000100100252525
Location: 100 miles from Nowhere, AR
 The contender has some rock and flare to it and usually fits a high withered racy body type.   The one I had was pinchy on my wide horses. 
↑ Top ↓ Bottom
ridejg
Reg. Jan 2009
Posted 2018-03-07 6:12 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?





100050010025
Location: South Dakota
Three 4 Luck - 2018-03-07 4:42 PM  The contender has some rock and flare to it and usually fits a high withered racy body type.   The one I had was pinchy on my wide horses. 

Agree...fits my high withered mare nice, but not my flat backed mare. 
↑ Top ↓ Bottom
dRowe
Reg. Jan 2017
Posted 2018-03-07 7:51 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?



Extreme Veteran


Posts: 599
500252525
I have a little 15 hand mare with medium(?) withers (not high, not flat). I have a 7” contender and it’s too wide for her. Very sad because it sits ME perfectly. I love love love the saddle but am going to have to sell it.
↑ Top ↓ Bottom
camocowgirl
Reg. Apr 2010
Posted 2018-03-12 5:15 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?


Unable to Live Without Chocolate or Coffee


Posts: 1841
100050010010010025
bump 
↑ Top ↓ Bottom
wishingforsun
Reg. Apr 2012
Posted 2018-03-12 6:31 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?




10025
camocowgirl - 2018-03-07 2:11 PM I need a saddle to fit my little paint 14.2 950lb. High withers. Not wide short back. A standard martin racer was too wide and too flat of bars. I found a nice Shiloh jp contender. Might that work? It’s 6 3/4 gullet. Someone said I need to try a double Lynn McKenzie special but I cannot find a used one in my price budget. I’ve never rode in a contender.

Love the Contenders but in my experience, the 6.75 gullet has Full QH bars and that will be too wide for the horse you described.  The 6.5 gullet with QH bars would be my pick for that horse.
↑ Top ↓ Bottom
camocowgirl
Reg. Apr 2010
Posted 2018-03-12 6:51 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?


Unable to Live Without Chocolate or Coffee


Posts: 1841
100050010010010025
wishingforsun - 2018-03-12 4:31 AM
camocowgirl - 2018-03-07 2:11 PM I need a saddle to fit my little paint 14.2 950lb. High withers. Not wide short back. A standard martin racer was too wide and too flat of bars. I found a nice Shiloh jp contender. Might that work? It’s 6 3/4 gullet. Someone said I need to try a double Lynn McKenzie special but I cannot find a used one in my price budget. I’ve never rode in a contender.
Love the Contenders but in my experience, the 6.75 gullet has Full QH bars and that will be too wide for the horse you described.  The 6.5 gullet with QH bars would be my pick for that horse.

ok I was a little worried about that. I have never had one but just by looking online they looked a little wide.  I grabbed a used bob marshall and actually it was the first saddle i cinched up that he didn't pin his ears and want to get fresh with! so maybe i'll be using it until i find a treed one that will fit!
↑ Top ↓ Bottom
quickdraw
Reg. Apr 2009
Posted 2018-03-12 9:56 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?


Boot Detective


Posts: 1898
1000500100100100252525
Check out the Martin BTR. A friend of mine has one and it fits a smaller, narrower horse. Also a Caldwell Pro Racer should work for your horse.


Edited by quickdraw 2018-03-12 9:57 PM
↑ Top ↓ Bottom
wishingforsun
Reg. Apr 2012
Posted 2018-03-13 3:24 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?




10025
camocowgirl - 2018-03-12 4:51 PM
wishingforsun - 2018-03-12 4:31 AM
camocowgirl - 2018-03-07 2:11 PM I need a saddle to fit my little paint 14.2 950lb. High withers. Not wide short back. A standard martin racer was too wide and too flat of bars. I found a nice Shiloh jp contender. Might that work? It’s 6 3/4 gullet. Someone said I need to try a double Lynn McKenzie special but I cannot find a used one in my price budget. I’ve never rode in a contender.
Love the Contenders but in my experience, the 6.75 gullet has Full QH bars and that will be too wide for the horse you described.  The 6.5 gullet with QH bars would be my pick for that horse.
ok I was a little worried about that. I have never had one but just by looking online they looked a little wide.  I grabbed a used bob marshall and actually it was the first saddle i cinched up that he didn't pin his ears and want to get fresh with! so maybe i'll be using it until i find a treed one that will fit!

I do have a 6.5 14" that I'd sell for $1450 shipped - I've been holding onto it because I love it and the way it rides but I sold the horses it fit and my current herd are all beyond wide.  Message me if you'd like more info. 
↑ Top ↓ Bottom
Dreamingofcans
Reg. Jan 2011
Posted 2018-07-21 12:12 AM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?



Elite Veteran


Posts: 974
5001001001001002525
Location: USA
Three 4 Luck - 2018-03-07 4:42 PM  The contender has some rock and flare to it and usually fits a high withered racy body type.   The one I had was pinchy on my wide horses. 

What saddle did you choose for your wide horse?  My contender is pinching mine too
↑ Top ↓ Bottom
ridejg
Reg. Jan 2009
Posted 2018-07-21 8:08 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?





100050010025
Location: South Dakota
Dreamingofcans - 2018-07-21 12:12 AM
Three 4 Luck - 2018-03-07 4:42 PM  The contender has some rock and flare to it and usually fits a high withered racy body type.   The one I had was pinchy on my wide horses. 
What saddle did you choose for your wide horse?  My contender is pinching mine too

I bought a Martin Saddlery Stingray about a month ago, and it works great for my wide flat backed horse, and also works good for my higher withered mare.  
↑ Top ↓ Bottom
got boost?
Reg. Sep 2003
Posted 2018-07-22 4:23 PM
Subject: RE: Shiloh Jordan Peterson contender, would it fit a high withers?



Loves to compete


Posts: 5760
50005001001002525
Location: Oakdale, CA
corriente would fit her.  I'm super impressed with the quality of the corriente barrel saddles................... 
↑ Top ↓ Bottom