bridle position for the nre bit I'm using??

You are logged in as a guest. Logon or register an account to access more features.

bridle position for the nre bit I'm using?? Moderators: luluwhit, gotothewhip, cindyt, crossspur, ForumAdmin Jump to page :	Last activity 2014-03-13 9:35 AM 13 replies, 3445 views View previous thread :: View next thread
General Discussion -> Barrel Talk


PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 9:16 AM Subject: bridle position for the nre bit I'm using??
Member Posts: 43	OK so I started using a combination bit on my mare cricket. I remembered she is the same as my old made I use to have who's name was cricket bug lol. but this bit worked amazing on turns and great cause I have light hands. but its been awhile since I have used this bit. and when I but it on my bridle then on cricket the bridle is right on her eye. I had to put extra holes in it to have the bit sit right in her mouth but the bridle is rubbing right on the bottom of her eye. I don't remember this happening on my old mare. but I used a nylon bridle on her. do you use this same bit if so can you show me how yours sit on your horse and what should I do... Bigger headstall or ??? thank you (tmp_Screenshot_2014-03-12-07-23-18-1-1889596217.png) Attachments ---------------- tmp_Screenshot_2014-03-12-07-23-18-1-1889596217.png (39KB - 295 downloads)
↑ Top ↓ Bottom

cecollins0811 Reg. Aug 2013	Posted 2014-03-12 9:29 AM Subject: RE: bridle position for the nre bit I'm using??
Expert Posts: 1631 Location: Somewhere around here	Ive had this bit before and I got rid of it. Whatever headstall I put it on it made the bridle strap very close to the horses eye. It's because of where the hook is where you loop your headstall through, it's position way too forward. If it was about an inch and possibly just half an inch back it would be just fine but the manufacturers keep on making it this way.
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 9:34 AM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	ya I remember when I used it on my old made it didn't look like that
↑ Top ↓ Bottom

cheryl makofka Reg. Jan 2011	Posted 2014-03-12 9:37 AM Subject: RE: bridle position for the nre bit I'm using??
The Advice Guru Posts: 6419	Do you have a bridle designed for a gag bit? These bits have shorter cheeks so the buckle is lower. If you do have a gag bridle and still having the problem, take the bridle to a local saddle maker, and have him/her to make you a bridle with even shorter cheeks. Your horse might just have a petite head and need a custom bridle for that bit
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 10:09 AM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	no its just a regular bridle I'm using I'll look them up. (tmp_IMG_112588397204995-1-543739663.jpg) Attachments ---------------- tmp_IMG_112588397204995-1-543739663.jpg (83KB - 223 downloads)
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 10:25 AM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	where can I find the bridles for these bits?
↑ Top ↓ Bottom

FlyingHigh1454 Reg. Oct 2013	Posted 2014-03-12 12:32 PM Subject: RE: bridle position for the nre bit I'm using??
Elite Veteran Posts: 1131	I use this on my gelding and I have several nice bridles that won't work with it because it requires such a short bridle on his almost pony sized head. I use a reins men bridle I bought on a whim at tractor supply and it is the ONLY bridle it will fit on, and it is still a little close to the eyes, but not much you can do when the horse only rides in that bit. Haha and it has never bothered him before.
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 5:06 PM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	here is a picture
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 5:14 PM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	I can't post a picture :( I'm trying to crop it down but it says its to big still
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 5:16 PM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	FlyingHigh1454 - 2014-03-12 11:32 PM I use this on my gelding and I have several nice bridles that won't work with it because it requires such a short bridle on his almost pony sized head. I use a reins men bridle I bought on a whim at tractor supply and it is the ONLY bridle it will fit on, and it is still a little close to the eyes, but not much you can do when the horse only rides in that bit. Haha and it has never bothered him before. I just started working at tractor supply which one is it so I can buy it:)
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 5:18 PM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	try again
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-12 6:17 PM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	.
↑ Top ↓ Bottom

FlyingHigh1454 Reg. Oct 2013	Posted 2014-03-13 9:29 AM Subject: RE: bridle position for the nre bit I'm using??
Elite Veteran Posts: 1131	PoliceWife2014 - 2014-03-12 6:16 PM FlyingHigh1454 - 2014-03-12 11:32 PM I use this on my gelding and I have several nice bridles that won't work with it because it requires such a short bridle on his almost pony sized head. I use a reins men bridle I bought on a whim at tractor supply and it is the ONLY bridle it will fit on, and it is still a little close to the eyes, but not much you can do when the horse only rides in that bit. Haha and it has never bothered him before. I just started working at tractor supply which one is it so I can buy it:) It is just a basic medium oil leather one. I bought it like 6 years ago and it's still holding up. Haha I don't even know if they have the exact one anymore.
↑ Top ↓ Bottom

PoliceWife2014 Reg. Mar 2014	Posted 2014-03-13 9:35 AM Subject: RE: bridle position for the nre bit I'm using??
Member Posts: 43	o OK I'll look online thank you
↑ Top ↓ Bottom