Viewing a thread

You are logged in as a guest. Logon or register an account to access more features.

Bits Moderators: luluwhit, gotothewhip, cindyt, crossspur, ForumAdmin Jump to page :	Last activity 2014-04-15 10:51 AM 4 replies, 3048 views View previous thread :: View next thread
General Discussion -> Barrel Talk


turnandburn_2011 Reg. Nov 2009	Posted 2014-04-14 9:39 PM Subject: Bits
Goin' on the Warpath Posts: 1386 Location: IN	What bit do you use and why? I'm learning about different bits right now and the purpose each bit serves. Trying to find one to help my mare work better.
↑ Top ↓ Bottom

BarrelRacing4Christ Reg. Sep 2010	Posted 2014-04-14 9:46 PM Subject: RE: Bits
Ms. Marine Posts: 4641 Location: Texas	I use a snaffle bit to start my horses out with and then eventually graduate them up to a smooth snaffle wonder bit. I just like the way the bit works and it works for my horses.
↑ Top ↓ Bottom

turnandburn_2011 Reg. Nov 2009	Posted 2014-04-14 10:58 PM Subject: RE: Bits
Goin' on the Warpath Posts: 1386 Location: IN	BarrelRacing4Christ - 2014-04-14 9:46 PM I use a snaffle bit to start my horses out with and then eventually graduate them up to a smooth snaffle wonder bit. I just like the way the bit works and it works for my horses. That's what I'm using right now. She's not a huge fan. But she's not a huge fan of anything yet. Lol
↑ Top ↓ Bottom

lindseylou2290 Reg. Aug 2013	Posted 2014-04-15 10:28 AM Subject: RE: Bits
Expert Posts: 2457	This is just a bit of what I work/run in ... start in a smooth snaffle. work into a square or twisted snaffle (if needed) advance to a myler with a low port - these come in o-rings, d-rings, or shanks depending on what you need - I happen to have all 3 as I love it. I have a handful of gags bits including goosetrees and such that I use for different horses at different times. My finished mare for cow work and anything not barrels or mounted shooting - works well in a custom bit that is a 3 piece dog bone with a little bitty copper roller in the middle. Its a fav for both of us. - can be found here - http://www.bitsandblankets.com/index.html I think the thing to remember with bits is that not only that your horse needs to "like it" but that you as a rider are aware of how you should "ride the bit" - Meaning, I can get heavier handed with a gag bit but riding a myler low port shank, I need to be incredibly soft with my hands and get the feel from my horse by my seat before I ask anything from my hands. Good Luck!
↑ Top ↓ Bottom

cheryl makofka Reg. Jan 2011	Posted 2014-04-15 10:51 AM Subject: RE: Bits
The Advice Guru Posts: 6419	Mine start out in an o ring 3 piece snaffle. The reason why the three piece, is it does not pinch the tongue, the bar in the middle prevents this, but still gives tongue pressure as well as bar and lip pressure. The o ring also works similar to a gag because when you pick up on the reins, you do not get immediate pressure, the reins slide along the ring then make contact. This gives the horse a chance to feel the pressure before it becomes constant. The second bit some will move up to is a sweet six with the lifesaver mouthpiece. This gives them gag pressure and poll pressure, it is a step up from the snaffle as the horse experiences more pressure when you pick up the reins. This bit also introduces curb pressure. Both of these bits have a lot of bend, and not much else. For a horse that needs lift or rate while maintaining bend, I go up to the Sheri cervi diamond lifter. This has a 1:1 ratio so it has equal poll and lifting pressure. This bit I find keeps the nose down and has more shoulder control and rate with the poll, curb, and gag action while keeping bend. To get a horse to straighten up in their turns I go to Ed wright shanked bits still with the 1:1 ratio. If the horse is stalling on the backside or has too much bend on the backside, I will try a s shanked hack but with this hack you do loose shoulder control and whoa
↑ Top ↓ Bottom