Log in to my account Barrel Horse World
Come on in Folks on-line

Today is

You are logged in as a guest. Logon or register an account to access more features.


measuring for a cinch

Moderators: luluwhit, gotothewhip, cindyt, crossspur, ForumAdmin
Jump to page : 		Last activity 2014-12-21 9:46 PM
2 replies, 2473 views

View previous thread :: View next thread
   General Discussion -> Barrel Talk
Refresh
 
mcorcoran
Reg. Sep 2008
Posted 2014-12-21 4:34 PM
Subject: measuring for a cinch



Expert


Posts: 1446
100010010010010025
Location: Wisconsin		 What is the most accurate way to measure? I've had off brand cinches the last few years, purchased used sometimes. Going to splurge later this winter and buy new. I/my horse prefer fleece covered cinches. Also, any recommendations on brands?
↑ Top ↓ Bottom
Burn n' Turn
Reg. Dec 2011
Posted 2014-12-21 6:57 PM
Subject: RE: measuring for a cinch


Elite Veteran


Posts: 747
50010010025
When I measure mine, I put the pad and saddle on my horse like I would when I go to ride. But, I let the cinch and stuff hang down. Then, I measure from the bottom of the rigging plate on both sides (when I measure mine, I get 48"). Then, since you want your cinch to be about 8 inches from your rigging on both sides, subtract 16". So, that number will be your cinch size. So my horse uses a 48-16=32" cinch. Does that make since?

*don't measure with your horse cinched up because it will add extra inches to the measurement. Measure from the rigging plate to rigging plate with the tape measure touching your horse.
↑ Top ↓ Bottom
mcorcoran
Reg. Sep 2008
Posted 2014-12-21 9:46 PM
Subject: RE: measuring for a cinch



Expert


Posts: 1446
100010010010010025
Location: Wisconsin
Burn n' Turn - 2014-12-21 5:57 PM

When I measure mine, I put the pad and saddle on my horse like I would when I go to ride. But, I let the cinch and stuff hang down. Then, I measure from the bottom of the rigging plate on both sides (when I measure mine, I get 48"). Then, since you want your cinch to be about 8 inches from your rigging on both sides, subtract 16". So, that number will be your cinch size. So my horse uses a 48-16=32" cinch. Does that make since?

*don't measure with your horse cinched up because it will add extra inches to the measurement. Measure from the rigging plate to rigging plate with the tape measure touching your horse.

 Yes makes sense. Thank you
↑ Top ↓ Bottom
Jump to page :
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
 
View previous thread :: View next thread

© Copyright 2002- BarrelHorseWorld.com All rights reserved including digital rights

Support - Contact / Log in to my account


Working Truck World Working Horse World Cargo Trailer World Horse Trailer World Roping Horse World
'
Registered to: Barrel Horse World
(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2026 PD9 Software