|
|
 Expert
Posts: 2674
   
Location: Silver Lake, MN | I want to add some bling to my helmet...sick of the boring look. But I have never done anything like this before. I am finding a lot of adhesive bling online that you can cut or apply idividually. Anyone try anything like this yet? Or anyone who has worked with those products have any ideas what would work best? |
|
| |
|
 Extreme Veteran
Posts: 575
| CarrieH77 - 2017-02-16 10:39 AM
I want to add some bling to my helmet...sick of the boring look. But I have never done anything like this before. I am finding a lot of adhesive bling online that you can cut or apply idividually. Anyone try anything like this yet? Or anyone who has worked with those products have any ideas what would work best?
Individual crystals with E6000 adhesive. That stuff is strong!! |
|
| |
|
Expert
Posts: 2674
Location: Silver Lake, MN | I was just reading and they said some will compromise the integrity of the helmet...so might need to do a little more research on this as some adhesives were okay it looked like per manufacturer specs. Thank you!! |
|
| |
|
  Elite Veteran
Posts: 1176
Location: Nor Cal | I personally don't have any recommendations but I can point you in the direction of a company that does bling helmets - Check out Purple Rein Creations on facebook! They have beautiful tack as well!! |
|
| |
|
Elite Veteran
Posts: 1074
| I have blinged my daughter's helmet before. I found my supplies at Hobby Lobby. I found a triple row of bling that matched the color of her helmet. It was very easy to apply along the crease of the helmet. Then she found 3 small flowers that had velcro on them. I glued the velcro to the helmet and stuck the flowers to it. It lasted 5 almost 6 years. She outgrew the helmet before the bling wore out. She had many compliments on the helmet. |
|
| |
|
Expert
Posts: 2674
Location: Silver Lake, MN | Awesome thank you for all the help! |
|
| |
|
 Expert
Posts: 1357
Location: Mississippi | I have not blinged, but I created my own designs out of vinyl for mine. Hoping the pictures will attach.
 (liveloveridesmall.jpg)
 (small 1.jpg)
Attachments
----------------
 liveloveridesmall.jpg (48KB - 153 downloads)
small 1.jpg (35KB - 155 downloads)
|
|
| |
|
 Banned by Booger
Posts: 2168
Location: Huffman, Texas | mine is blinged and hatted..LOL |
|
| |
|
 I Prefer to Live in Fantasy Land
Posts: 64864
Location: In the Hills of Texas | Most adhesives will eat through the plastic on a helmet. |
|
| |
|
Expert
Posts: 2674
Location: Silver Lake, MN | Nevertooold - 2017-02-17 3:03 PM Most adhesives will eat through the plastic on a helmet.
That is what I was worried about...I suppose you would see more out there if you could. Just trying to find a way to customize and make them a little fancier! |
|
| |
|
I Prefer to Live in Fantasy Land
Posts: 64864
Location: In the Hills of Texas | CarrieH77 - 2017-02-17 3:12 PM Nevertooold - 2017-02-17 3:03 PM Most adhesives will eat through the plastic on a helmet. That is what I was worried about...I suppose you would see more out there if you could. Just trying to find a way to customize and make them a little fancier!
I tried to get Rodeo Drive to do some blinged out helmets for me to sell years ago and the glue that would actually hold the crystals on ate the plastic. |
|
| |
|
 Keeper of the King Snake
Posts: 7616
Location: Dubach, LA | |
|
| |
|
Expert
Posts: 2674
Location: Silver Lake, MN | Nevertooold - 2017-02-17 7:42 PM CarrieH77 - 2017-02-17 3:12 PM Nevertooold - 2017-02-17 3:03 PM Most adhesives will eat through the plastic on a helmet. That is what I was worried about...I suppose you would see more out there if you could. Just trying to find a way to customize and make them a little fancier!
Well then...I will just stick to the factory stuff then because safety is why I wear one. LOL. Dang it!! |
|
| |
|
 Expert
Posts: 3815
Location: The best kept secret in TX | Find a T-Shirt shop or someone with a vinyl making business and ask for some custom graphics. You can also call a vinyl vehicle wrap place and they can wrap the whole helmet with whatever design you want.  |
|
| |
|
I Prefer to Live in Fantasy Land
Posts: 64864
Location: In the Hills of Texas | CarrieH77 - 2017-02-20 8:39 AM Nevertooold - 2017-02-17 7:42 PM CarrieH77 - 2017-02-17 3:12 PM Nevertooold - 2017-02-17 3:03 PM Most adhesives will eat through the plastic on a helmet. That is what I was worried about...I suppose you would see more out there if you could. Just trying to find a way to customize and make them a little fancier!
You could try the E600 and just add a few crystals and see what happens. That glue is much weaker then the glue that Rodeo Drive uses. |
|
| |
|
Expert
Posts: 2674
Location: Silver Lake, MN | IRunOnFaith - 2017-02-20 10:28 AM Find a T-Shirt shop or someone with a vinyl making business and ask for some custom graphics. You can also call a vinyl vehicle wrap place and they can wrap the whole helmet with whatever design you want.
I did think about this option as well. My dad offered to paint it as well but again I'm worried as they are not as hardy as like a motorcycle helmet for instance. LOL. I need to do some research. Thank you for all the help guys! |
|
| |
|
Expert
Posts: 1357
Location: Mississippi | CarrieH77 - 2017-02-20 5:58 AM IRunOnFaith - 2017-02-20 10:28 AM Find a T-Shirt shop or someone with a vinyl making business and ask for some custom graphics. You can also call a vinyl vehicle wrap place and they can wrap the whole helmet with whatever design you want.
I'd be happy to create a custom vinyl design for you. I can send you some examples of some of my work if you're interested. |
|
| |
|
"Heck's Coming With Me"
Posts: 10794
Location: Kansas | Has anyone who watches PBR noticed Stetson Lawrence's helmet. It has feathers painted on it to look like something of a warbonnet. Very cool.....all black, purple and white.
|
|
| |
Folks on-line