Log in to my account Barrel Horse World
Come on in Folks on-line

Today is

You are logged in as a guest. Logon or register an account to access more features.


List of safe mills-Purina should be on it

Jump to page :
Last activity 2015-11-24 6:42 AM
35 replies, 6952 views

View previous thread :: View next thread
   General Discussion -> Barrel Talk
Refresh
 
oranges
Reg. Sep 2009
Posted 2015-11-21 8:25 AM
Subject: List of safe mills-Purina should be on it


Extreme Veteran


Posts: 396
100100100252525
We have our cattle on Purina mineral and I email them a question about that. I casually mentioned our horses are sometimes in the pasture with the cattle and that mineral. I'm so impressed they picked that out of my email right away and this is the response:

Thank you for your question. Thank you for choosing Purina products. The issue with any cattle product, whether it is feed or molasses tubs, is that these products are manufactured in the same facility as products with medications, such as Bovatec, that are harmful and even fatal for horses. Even if a product itself contains no ingredients that are toxic to horses, there is always the risk of possible contamination from a previous product that went through the plant that does contain these ingredients. If a medicated cattle product goes through a line and then is followed by a non-medicated product, there is a risk of some of the medicated product hanging up in the equipment somewhere and ending up in a subsequent product as it comes through the same line. Or there is the risk of an error in manufacturing where a medication is put in a batch of feed accidentally.

That is why Purina doesn't make any horse product in the same facility where a medicated cattle feed is manufactured, we just don't want any risk at all of possible contamination or error that could be harmful to horses. Any time a product is used off-label, meaning feeding horses a product labeled for cattle, the owner assumes any risk. I know it is difficult when horses and cattle are kept in the same pastures, but I just don't ever recommend exposing horses to cattle products due to this potential risk.

I am sending this to our nutritionist to answer the other half of your question.
↑ Top ↓ Bottom
Bibliafarm
Reg. Jul 2008
Posted 2015-11-21 8:55 AM
Subject: RE: List of safe mills-Purina should be on it


Military family

Warmblood with Wings


Posts: 27846
50005000500050005000200050010010010025
Location: Florida..
Purina is on it.. thats awesome they answered straightforward and No Nonsense.. yay for Purina..  
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 8:57 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
Purina isn't on it because by their own admission, they have 4 plants that do manufacture medicated cattle and horse feed. While the are segregated, they can do both but don't. I don't know about you, but to me this is not "safe".

If you go to the Facebook page Is Your Horse Feed Safe? and find the Safe List, look in the comments. There you will find the Purina information, given by Purina, that made them not necessarily "safe".

I was feeding Omalene 200. I had two horses that weren't looking very good. I finally got fed up and started mixing my own feed by buying bags of oats, barley, timothy hay pellets and beet pulp shreds from known "safe" companies. I didn't change the amount of grain I was feeding, just the type. After 3 weeks I am having to cut ever ones amount in half because they are getting too fat.
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 8:59 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
I can't edit on FB from my phone otherwise I would have removed it. On other lists I've done, I haven't put Purina on because of what they said.
↑ Top ↓ Bottom
Bibliafarm
Reg. Jul 2008
Posted 2015-11-21 9:02 AM
Subject: RE: List of safe mills-Purina should be on it


Military family

Warmblood with Wings


Posts: 27846
50005000500050005000200050010010010025
Location: Florida..
 It was my understanding they use seperate facilities or buildings ? is this incorrect? and is this in all areas? I personally dont like the Omalene Line.. at all..to me its not a good product.. but thats my opinion.... the others the SR JR and Ultuim line have had good success with..

Edited by Bibliafarm 2015-11-21 9:08 AM
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 9:16 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
Bibliafarm - 2015-11-21 8:02 AM

Β It was my understanding they use seperate facilities or buildings ? is this incorrect? and is this in all areas? I personally dont like the Omalene Line.. at all..to me itsΒ not a good product.. but thats my opinion....Β the others the SR JR and Ultuim line have had good success with..

From the reply they sent, it is the lines that are segregated, not the building. But they could use the same lines if they wanted to was what it also said. Nothing was said about the mixer though. So who knows if the same mixer is used and just the lines are different? I can't copy and paste from FB on my phone either. Otherwise I'd share that screenshot. I might be at a real computer next week. If so, I'll do it then. But reading that screenshot made me very leery. Much like when Nutrena told me they didn't use ionophores in their bagged feed, only bulk. Again it goes back to the possibility of a shared mixer where you could still get trace amounts.
↑ Top ↓ Bottom
Three 4 Luck
Reg. Sep 2003
Posted 2015-11-21 9:26 AM
Subject: RE: List of safe mills-Purina should be on it



Accident Prone


Posts: 22277
50005000500050002000100100252525
Location: 100 miles from Nowhere, AR
 Maybe they tweaked that due to all the issues and customers questioning. 
↑ Top ↓ Bottom
Bibliafarm
Reg. Jul 2008
Posted 2015-11-21 9:27 AM
Subject: RE: List of safe mills-Purina should be on it


Military family

Warmblood with Wings


Posts: 27846
50005000500050005000200050010010010025
Location: Florida..
SKM - 2015-11-21 10:16 AM
Bibliafarm - 2015-11-21 8:02 AM  It was my understanding they use seperate facilities or buildings ? is this incorrect? and is this in all areas? I personally dont like the Omalene Line.. at all..to me its not a good product.. but thats my opinion.... the others the SR JR and Ultuim line have had good success with..
From the reply they sent, it is the lines that are segregated, not the building. But they could use the same lines if they wanted to was what it also said. Nothing was said about the mixer though. So who knows if the same mixer is used and just the lines are different? I can't copy and paste from FB on my phone either. Otherwise I'd share that screenshot. I might be at a real computer next week. If so, I'll do it then. But reading that screenshot made me very leery. Much like when Nutrena told me they didn't use ionophores in their bagged feed, only bulk. Again it goes back to the possibility of a shared mixer where you could still get trace amounts.

 OK thank you alot..
↑ Top ↓ Bottom
FLITASTIC
Reg. Jun 2012
Posted 2015-11-21 9:33 AM
Subject: RE: List of safe mills-Purina should be on it



Expert


Posts: 5290
5000100100252525
SKM - 2015-11-21 6:57 AM

Purina isn't on it because by their own admission, they have 4 plants that do manufacture medicated cattle and horse feed. While the are segregated, they can do both but don't. I don't know about you, but to me this is not "safe".

If you go to the Facebook page Is Your Horse Feed Safe? and find the Safe List, look in the comments. There you will find the Purina information, given by Purina, that made them not necessarily "safe".

I was feeding Omalene 200. I had two horses that weren't looking very good. I finally got fed up and started mixing my own feed by buying bags of oats, barley, timothy hay pellets and beet pulp shreds from known "safe" companies. I didn't change the amount of grain I was feeding, just the type. After 3 weeks I am having to cut ever ones amount in half because they are getting too fat.

Omelene 200 is 40 % sugar! I would not expect a horse to look good on it! All processed feeds are not good for horses. Some are just worse than others.
↑ Top ↓ Bottom
Southtxponygirl
Reg. Nov 2006
Posted 2015-11-21 9:44 AM
Subject: RE: List of safe mills-Purina should be on it



A Somebody to Everybody


Posts: 41354
5000500050005000500050005000500010001001001002525
Location: Under The Big Sky Of Texas
I think Omelene 200 is about the worse feed to be feeding, it made my horses hot when I tryed it out years ago. Used it for about 3 months and stoped. 
↑ Top ↓ Bottom
oranges
Reg. Sep 2009
Posted 2015-11-21 9:45 AM
Subject: RE: List of safe mills-Purina should be on it


Extreme Veteran


Posts: 396
100100100252525
In the reply they sent me as I pasted above I quote

That is why Purina doesn't make any horse product in the same facility where a medicated cattle feed is manufactured, we just don't want any risk at all of possible contamination or error that could be harmful to horses.

We have our horses on whole oats and flax, but I am currently using Purina Cattle products for our cows. I am now considering their mineral for our horses, because of this email response. I realized the horse mineral I'm using is from a mill that mills medicated cattle feed in it.
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 9:46 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
FLITASTIC - 2015-11-21 8:33 AM

SKM - 2015-11-21 6:57 AM

Purina isn't on it because by their own admission, they have 4 plants that do manufacture medicated cattle and horse feed. While the are segregated, they can do both but don't. I don't know about you, but to me this is not "safe".

If you go to the Facebook page Is Your Horse Feed Safe? and find the Safe List, look in the comments. There you will find the Purina information, given by Purina, that made them not necessarily "safe".

I was feeding Omalene 200. I had two horses that weren't looking very good. I finally got fed up and started mixing my own feed by buying bags of oats, barley, timothy hay pellets and beet pulp shreds from known "safe" companies. I didn't change the amount of grain I was feeding, just the type. After 3 weeks I am having to cut ever ones amount in half because they are getting too fat.

Omelene 200 is 40 % sugar! I would not expect a horse to look good on it! All processed feeds are not good for horses. Some are just worse than others.

Well sometimes when your choices are extremely limited...you feed what you believe is the best of your options at that given time until you figure out something isn't right so you start doing countless hours of research to fix it. But thanks for the snarky reply. It really made me feel better about the fact I've already beat myself up about the mistake I made.
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 9:53 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
oranges - 2015-11-21 8:45 AM

In the reply they sent me as I pasted above I quote

That is why Purina doesn't make any horse product in the same facility where a medicated cattle feed is manufactured, we just don't want any risk at all of possible contamination or error that could be harmful to horses.

We have our horses on whole oats and flax, but I am currently using Purina Cattle products for our cows. I am now considering their mineral for our horses, because of this email response. I realized the horse mineral I'm using is from a mill that mills medicated cattle feed in it.

The reply I was referring to was given back in May, I think it was? Maybe they modified it recently so it didn't scare people off?

I would recommend calling Purina and putting them on the spot about the 4 plants with segregated lines. Ask them if the segregated lines run into the same mixer or if they use the same bagging lines for horse and cattle feed at those plants. If they say yes to either, they can still get trace amounts in horse feed. If any piece of the same equipment is used, there will be a risk.
↑ Top ↓ Bottom
SKM
Reg. Dec 2003
Posted 2015-11-21 10:02 AM
Subject: RE: List of safe mills-Purina should be on it



Saint Stacey


500050005000500050005000500050010010010010025
Ask if they use the same hammer mill, mixer and bagging lines on those segretated facilities. If it's a loose mineral, I'm assuming it goes through a hammer mill and into a mixer. Then the mixer usually dumps into a bagging line or a pellet mill depending on what they are making.
↑ Top ↓ Bottom
Bibliafarm
Reg. Jul 2008
Posted 2015-11-21 10:08 AM
Subject: RE: List of safe mills-Purina should be on it


Military family

Warmblood with Wings


Posts: 27846
50005000500050005000200050010010010025
Location: Florida..
SKM - 2015-11-21 10:46 AM
FLITASTIC - 2015-11-21 8:33 AM
SKM - 2015-11-21 6:57 AM Purina isn't on it because by their own admission, they have 4 plants that do manufacture medicated cattle and horse feed. While the are segregated, they can do both but don't. I don't know about you, but to me this is not "safe". If you go to the Facebook page Is Your Horse Feed Safe? and find the Safe List, look in the comments. There you will find the Purina information, given by Purina, that made them not necessarily "safe". I was feeding Omalene 200. I had two horses that weren't looking very good. I finally got fed up and started mixing my own feed by buying bags of oats, barley, timothy hay pellets and beet pulp shreds from known "safe" companies. I didn't change the amount of grain I was feeding, just the type. After 3 weeks I am having to cut ever ones amount in half because they are getting too fat.
Omelene 200 is 40 % sugar! I would not expect a horse to look good on it! All processed feeds are not good for horses. Some are just worse than others.
Well sometimes when your choices are extremely limited...you feed what you believe is the best of your options at that given time until you figure out something isn't right so you start doing countless hours of research to fix it. But thanks for the snarky reply. It really made me feel better about the fact I've already beat myself up about the mistake I made.

 I wouldnt beat yourself up I used to feed it about 20 yrs ago.. and alot still do.. its just a sweet feed and I think they are like not good for them but like you said sometimes if its all we have then we do what we have to do and  also until we research dont realize it. I stay away from any sweet feed in my programs. I think Ultuim is the closest I got and it made my horses bonkers..
lol

thanks for the info and II think we all should email and see if its been revised or whats the whole situation there. I trust them. I used to use Triple crown and ADM was my go to.. but have use the Purina sr for many years ..so we will see..
↑ Top ↓ Bottom
Three 4 Luck
Reg. Sep 2003
Posted 2015-11-21 10:21 AM
Subject: RE: List of safe mills-Purina should be on it



Accident Prone


Posts: 22277
50005000500050002000100100252525
Location: 100 miles from Nowhere, AR
SKM - 2015-11-21 9:46 AM
FLITASTIC - 2015-11-21 8:33 AM
SKM - 2015-11-21 6:57 AM Purina isn't on it because by their own admission, they have 4 plants that do manufacture medicated cattle and horse feed. While the are segregated, they can do both but don't. I don't know about you, but to me this is not "safe". If you go to the Facebook page Is Your Horse Feed Safe? and find the Safe List, look in the comments. There you will find the Purina information, given by Purina, that made them not necessarily "safe". I was feeding Omalene 200. I had two horses that weren't looking very good. I finally got fed up and started mixing my own feed by buying bags of oats, barley, timothy hay pellets and beet pulp shreds from known "safe" companies. I didn't change the amount of grain I was feeding, just the type. After 3 weeks I am having to cut ever ones amount in half because they are getting too fat.
Omelene 200 is 40 % sugar! I would not expect a horse to look good on it! All processed feeds are not good for horses. Some are just worse than others.
Well sometimes when your choices are extremely limited...you feed what you believe is the best of your options at that given time until you figure out something isn't right so you start doing countless hours of research to fix it. But thanks for the snarky reply. It really made me feel better about the fact I've already beat myself up about the mistake I made.

 I fed a co-op version of Omolene and then Omolene itself in the 90s to some danged nice horses.  I never had issues with the sugar content until one particular horse.  No need to beat yourself up.  You recognized a problem and fixed it.  
↑ Top ↓ Bottom
Fun2Run
Reg. Jul 2005
Posted 2015-11-21 10:42 AM
Subject: RE: List of safe mills-Purina should be on it



A Barrel Of Monkeys


Posts: 12972
5000500020005001001001001002525
Location: Texas
One day I will visit the Fort Worth facility. But here is what I've been told:

That facility does manufacture medicated cattle feed, but in a separate mill, with separate lines.   
↑ Top ↓ Bottom
NJJ
Reg. Jul 2006
Posted 2015-11-21 11:09 AM
Subject: RE: List of safe mills-Purina should be on it


Military family

Fact Checker


Posts: 16572
50005000500010005002525
Location: Displaced Iowegian
Truly folks, unless you PERSONALLY visit each and every Purina Mill, you can choose to believe what they just wrote.....or choose not to........ 
↑ Top ↓ Bottom
Fun2Run
Reg. Jul 2005
Posted 2015-11-21 11:21 AM
Subject: RE: List of safe mills-Purina should be on it



A Barrel Of Monkeys


Posts: 12972
5000500020005001001001001002525
Location: Texas
NJJ - 2015-11-21 11:09 AM Truly folks, unless you PERSONALLY visit each and every Purina Mill, you can choose to believe what they just wrote.....or choose not to........ 

^^Truth.  There is a mill in Okla (Red River) that makes zero medicated feed. Their formula is fixed and lists everything in the feed on the bag, not the tag, so it rarely changes.  Because it is not a big name company with big overhead, their feed is cheaper than what I'm buying that Purina makes.  I'm thinking I will be switching to this feed in the future, save a few $$ and know the ingredients exactly.

I know there are areas in the country where Purina might be the only choice, and I'd feel safe feeding that.

 
↑ Top ↓ Bottom
Southtxponygirl
Reg. Nov 2006
Posted 2015-11-21 11:38 AM
Subject: RE: List of safe mills-Purina should be on it



A Somebody to Everybody


Posts: 41354
5000500050005000500050005000500010001001001002525
Location: Under The Big Sky Of Texas
NJJ - 2015-11-21 11:09 AM Truly folks, unless you PERSONALLY visit each and every Purina Mill, you can choose to believe what they just wrote.....or choose not to........ 

Just what I was thinking , They could be writing this stuff just to make people happy.  
↑ Top ↓ Bottom
Jump to page :
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
 

© Copyright 2002- BarrelHorseWorld.com All rights reserved including digital rights

Support - Contact / Log in to my account


Working Truck World Working Horse World Cargo Trailer World Horse Trailer World Roping Horse World
'
Registered to: Barrel Horse World
(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2025 PD9 Software